Top 5 Wheel Loader Snow Plows for Commercial Lots
Five wheel loader snow plows compared on blade width, loader class, mounting and price — from 8 ft pushers to 12 ft folding V-plows — so you can match the right attachment to your fleet.

Wheel loader snow plows range from 8 ft fixed-wing pushers to 12 ft folding V-plows, and the right choice depends on your loader class, lot layout and snow volume. Five commercial-grade models are compared below: Snow Wolf QuattroPlowXT, Western Pile Driver, Fisher Storm Boxx, KAGE SnowFire and Henke Folding V-Plow.
How to Choose a Wheel Loader Snow Plow
Choosing a wheel loader snow plow starts with the coupler. Wheel loaders use larger, heavier mounting systems than skid steers, and coupler types vary between manufacturers. Pin-on mounts are the cheapest but the slowest to swap. Quick-attach couplers (Euro-style, ISO-style or proprietary) cost more upfront but let an operator change from a snow plow to a bucket or a snow pusher without leaving the cab. Confirm pin spacing, plate dimensions and hydraulic flow (GPM and PSI) before ordering any attachment.
Match the plow to the loader’s operating weight. An undersized loader stalls against compacted windrows; an oversized plow on a light machine lifts the rear tires off the ground and loses traction. Most manufacturers publish a minimum machine weight — for example, Snow Wolf rates the QuattroPlowXT for loaders in the 10,000-15,000 lb class.
Blade width should fit the lanes and lots you clear. A 10 ft plow handles two-lane access roads in a single pass. A 14-16 ft pusher clears a big-box parking lot in fewer passes but needs a loader with the horsepower and hydraulic capacity to push that volume of snow. Moldboard height matters too: a 48 in. moldboard (standard on Fisher’s loader-class Storm Boxx) contains more snow per pass than a 30 in. blade sized for skid steers.
Finally, decide between a straight plow, a pusher, a V-plow or a hybrid. Each type suits a different lot layout, and the comparison below covers all four.

Snow Wolf QuattroPlowXT
The Snow Wolf QuattroPlowXT is an autowing plow designed for skid steers, compact wheel loaders, tractors and backhoes in the 10,000-15,000 lb operating weight range. Its wings rotate 165 degrees, letting it switch between angle plowing, wide-angle plowing, pushing and backdragging with only two hydraulic hoses and no electrical controls.
Three sizes are available:
- QPXT-126: 9 ft blade, 154 in. maximum width, 1,464 lb
- QPXT-138: 10 ft blade, 166 in. maximum width, 1,540 lb
- QPXT-150: 11 ft blade, 178 in. maximum width, 1,575 lb
In wide-angle mode each wing adds 23 in. of width to the blade, which helps contain snow on parking lots. The 35-degree moldboard angle and tight curvature roll snow with less horsepower than a flat-faced pusher, according to Snow Wolf.
Price: $12,500-$12,900 depending on width (MSRP as listed by dealers).
An optional ActivEdge floating cutting-edge system and a PowerWing upgrade for independent wing operation are available separately. The QuattroPlowXT competes most directly with the KAGE SnowFire as a hybrid that serves as both a plow and a pusher.
Western Pile Driver
Western Products’ Pile Driver is a fixed-wing pusher plow built for loaders, backhoes, skid steers and series 3-4 tractors rated at 70+ HP. It comes in 8, 10, 12, 14 and 16 ft widths and uses Western’s TRACE Edge technology — a segmented rubber cutting edge that conforms to uneven pavement and reduces the scraping noise that bothers tenants and neighbors on overnight pushes.
The standard Pile Driver and the upgraded Pile Driver XL share the same width options. Western does not publish weights publicly; spec sheets are available through dealers. The Pile Driver’s fixed wings contain snow on the push but do not angle, so it works best on open lots where the operator can stack at the perimeter. For lanes and roads that need angled plowing, pair it with a separate angle blade or V-plow.
Western is owned by Douglas Dynamics, which also manufactures Fisher and SnowEx. Dealers often stock parts for all three brands, which can simplify warranty and service for fleets that run mixed equipment.
Fisher Storm Boxx
The Fisher Engineering Storm Boxx is a pusher plow available in wheel-loader-class models at 12, 14 and 16 ft widths. Each has a 48 in. tall moldboard with full-height side plates, giving it a snow-carrying capacity of 15-21 cubic yards depending on the model.
Specs by size:
| Model | Blade width | Weight | Min. HP |
|---|---|---|---|
| Storm Boxx 12 ft | 12 ft | 1,680 lb | 100 HP |
| Storm Boxx 14 ft | 14 ft | 1,815 lb | 100 HP |
| Storm Boxx 16 ft | 16 ft | 1,950 lb | 140 HP |
Construction is fully welded steel with adjustable, reversible rubber cutting edges and heavy-duty bolt-on wear shoes. The rubber edge is the same TRACE technology used on the Western Pile Driver (Fisher and Western share a parent company in Douglas Dynamics).
The Storm Boxx HX variant adds hydraulic wings that fold inward for transport and expand outward on the job. The HX is available in the same widths and adds the ability to angle snow, bridging the gap between a pusher and a plow. Fisher does not list retail pricing; contact a dealer for quotes.
KAGE SnowFire
The KAGE SnowFire, from KAGE Innovation, is a hybrid system that pairs a plow blade with a separate containment box. The operator drops the box onto the blade in seconds, converting a straight plow into a box pusher without leaving the seat. Dropping the box at the snow pile turns it back into a plow for the return pass.
Available widths are 6, 8, 9, 10 and 12 ft. The 8 ft system (model SBK96) weighs 1,031 lb for the blade alone and 1,473 lb with the box attached. KAGE rates the SnowFire for compact wheel loaders in the 5,000-15,000 lb class, making it one of the lighter-duty options in this list — useful for smaller lots where a 14-16 ft pusher would be too wide.
Price: $11,029-$12,350 depending on width (dealer list prices as of 2026).
The plow-to-pusher conversion is the SnowFire’s main selling point. On a mixed-use property — say a strip mall with travel lanes, a front lot and a loading area — one attachment handles all three zones. The trade-off is that the two-piece system has more components to maintain than a single-piece pusher.
Henke Folding V-Plow
Henke Manufacturing’s Folding V-Plow is a heavy-duty, multi-directional blade built for wheel loaders and motor graders. The standard model (FV-12) measures 144 in. (12 ft) wide by 48 in. tall and operates in four modes: vee, scoop, straight plow and bulldoze.
The moldboard is a multi-box reinforced quarter-inch steel plate with half-inch ribs and a full-length 7 in. x 22.7 lb/ft structural channel. The 5 in. center pin assembly uses 1 in. DOM tubing and a 3 in. solid cold-rolled steel pin. Nitrogen accumulators protect the cylinders from shock loads when the blade hits a curb or a manhole cover.
The Folding V-Plow accepts downpressure from the loader’s lift arms, which helps the blade scrape packed snow and ice without bouncing. Optional moldboard extensions and flare shields are available for operations that need extra width or containment.
Henke does not publish retail pricing on its website. Comparable Henke multi-blade plows in the 10-14 ft range are listed by dealers at $11,263-$12,064. The Folding V-Plow suits contractors who need one attachment that can break through heavy drifts (vee mode), windrow (angle), clean up (scoop) and grade (bulldoze) — all on the same pass.
Side-by-Side Comparison
All five wheel loader snow plows are compared in the table below on type, blade width, weight, loader class and price.
| Feature | Snow Wolf QuattroPlowXT | Western Pile Driver | Fisher Storm Boxx | KAGE SnowFire | Henke Folding V-Plow |
|---|---|---|---|---|---|
| Type | Autowing hybrid | Fixed-wing pusher | Pusher plow | Plow + box hybrid | Folding V-plow |
| Blade widths | 9, 10, 11 ft | 8, 10, 12, 14, 16 ft | 12, 14, 16 ft | 6, 8, 9, 10, 12 ft | 12 ft |
| Weight range | 1,464-1,575 lb | Not published | 1,680-1,950 lb | 1,031-1,473 lb | Not published |
| Loader class | 10,000-15,000 lb | 70+ HP | 100-140+ HP | 5,000-15,000 lb | Loaders and graders |
| Moldboard height | Not published | Not published | 48 in. | Not published | 48 in. |
| Cutting edge | Steel / ActivEdge option | TRACE rubber | TRACE rubber | Steel | Steel |
| Modes | Angle, wide-angle, push, backdrag | Push only | Push (HX: push + angle) | Plow, push | Vee, scoop, straight, bulldoze |
| Price (approx.) | $12,500-$12,900 | Dealer quote | Dealer quote | $11,029-$12,350 | Dealer quote |
Image credits: AI-generated illustration (Runware/FLUX), not a product photo
Richard Delonge
Insurance and liabilityRichard Delonge covers insurance and liability for snow removal contractors at Snow & Ice America.
Price your next snow job in 60 seconds.
Estimate per-push, per-inch and seasonal pricing for any lot.


